GWS3121AP840
Code: 1976117
Code: 1976117
Lamp holder
Other
Nominal current
350 - 350mA
Suitable for wall mounting
Yes
Suitable for light line configuration
No
Suitable for ceiling mounting
Yes
Suitable for built-in mounting
No
With light source
Yes
Colour housing
Grey
Surface protection housing
Untreated
Material housing
Plastic
Material cover
Plastic, opal
Voltage type
AC
Nominal voltage
220 - 240V
Dimming 0-10 V
No
With control gear
Yes
Suitable for suspended mounting
Yes
Dimming 1-10 V
No
Dimming potentiometer (integrated)
No
Type of control gear
LED operating device current-controlled
Dimming manufacturer's proprietary system
No
Dimming mains voltage modulation
No
Suitable for surface mounting
Yes
Dimming DALI-2
Yes
Exchangeable control gear
No
Dimming DALI
Yes
Dimming DMX
No
Dimming LineSwitch
No
Lamp type
LED not exchangeable
Suitable for workplace according to EN 12464-1
No
Dimming phase cut-off
No
Dimming phase cut-on
No
Dimming Zigbee
No
Type of grid
None
Dimming with push-button
No
Dimming Sine Wave Reduction
No
No dim function
No
Dimming RF
No
Suitable for number of lamps
1
Dimming Touch and Dim
No
Dimming DSI
No
Dimming programmable
No
Light distributor
Reflector
Light outlet
Direct
Light sharing
Symmetric
Degree of protection (IP)
IP66
Impact strength
IK08
Max. number of luminaires per miniature circuit breaker B16
29
Max. number of luminaires per miniature circuit breaker C16
49
Colour consistency (McAdam ellipse)
SDCM3
Luminaire with limited surface temperature, sign "D“
Yes
Protection class
II
Lumen maintenance at median useful life of 50,000 hrs at 25 °C ambient (tq)
90%
Beam angle
Extreme wide beam >80°
Failure rate at median useful life of 50,000 hrs at 25 °C ambient (tq)
10%
Rated ambient temperature according to IEC62722-2-1
-25 - 50°C
Suitable for emergency lighting
No
With movement sensor
No
Emergency power supply integrated
No
With light sensor
No
Covering of the luminaire with thermally insulating material possible
No
With air slots
No
Filament test according to IEC 60695-2-11
850 °C - 30 s
Max. system power
26W
Luminaire efficacy
142lm/W
Rated luminous flux according to IEC 62722-2-1
3700lm
Colour temperature
4000 - 4000K
Colour rendering index CRI
80-89
Power factor
0.9
Colour of light
White
Height/depth
76mm
Width
110mm
Constant light output (CLO)
No
Length
800mm
Type of wiring
Ending
Number of poles
4
Conductor cross section
2.5mm²
Connection type
Push-in clamp
Photobiological safety according to EN 62471
RG0
Luminous flux adjustable
Continuously variable
Unified Glare Ratio (UGR)
25
Colour temperature adjustable
No
Beam angle adjustable
No
Compatible with Casambi
No
Compatible with Google Assistant
No
Compatible with Amazon Alexa
No
Compatible with Apple HomeKit
No
Operation by Bluetooth
No
IFTTT support available
No
Zagreb:
0 pcs
Zadar:
0 pcs
GWS3121AP840
Lamp holder
Other
Nominal current
350 .. 350mA
Suitable for wall mounting
Suitable for light line configuration
Suitable for ceiling mounting
Suitable for built-in mounting
With light source
Colour housing
Grey
Surface protection housing
Untreated
Material housing
Plastic
Material cover
Plastic, opal
Voltage type
AC
Nominal voltage
220 .. 240V
Dimming 0-10 V
With control gear
Suitable for suspended mounting
Dimming 1-10 V
Dimming potentiometer (integrated)
Type of control gear
LED operating device current-controlled
Dimming manufacturer's proprietary system
Dimming mains voltage modulation
Suitable for surface mounting
Dimming DALI-2
Exchangeable control gear
Dimming DALI
Dimming DMX
Dimming LineSwitch
Lamp type
LED not exchangeable
Suitable for workplace according to EN 12464-1
Dimming phase cut-off
Dimming phase cut-on
Dimming Zigbee
Type of grid
None
Dimming with push-button
Dimming Sine Wave Reduction
No dim function
Dimming RF
Suitable for number of lamps
1
Dimming Touch and Dim
Dimming DSI
Dimming programmable
Light distributor
Reflector
Light outlet
Direct
Light sharing
Symmetric
Degree of protection (IP)
IP66
Impact strength
IK08
Max. number of luminaires per miniature circuit breaker B16
29
Max. number of luminaires per miniature circuit breaker C16
49
Colour consistency (McAdam ellipse)
SDCM3
Luminaire with limited surface temperature, sign "D“
Protection class
II
Lumen maintenance at median useful life of 50,000 hrs at 25 °C ambient (tq)
90%
Beam angle
Extreme wide beam >80°
Failure rate at median useful life of 50,000 hrs at 25 °C ambient (tq)
10%
Rated ambient temperature according to IEC62722-2-1
-25 .. 50°C
Suitable for emergency lighting
With movement sensor
Emergency power supply integrated
With light sensor
Covering of the luminaire with thermally insulating material possible
With air slots
Filament test according to IEC 60695-2-11
850 °C - 30 s
Max. system power
26W
Luminaire efficacy
142lm/W
Rated luminous flux according to IEC 62722-2-1
3700lm
Colour temperature
4000 .. 4000K
Colour rendering index CRI
80-89
Power factor
0.9
Colour of light
White
Height/depth
76mm
Width
110mm
Constant light output (CLO)
Length
800mm
Type of wiring
Ending
Number of poles
4
Conductor cross section
2.5mm²
Connection type
Push-in clamp
Photobiological safety according to EN 62471
RG0
Luminous flux adjustable
Continuously variable
Unified Glare Ratio (UGR)
25
Colour temperature adjustable
No
Beam angle adjustable
No
Compatible with Casambi
Compatible with Google Assistant
Compatible with Amazon Alexa
Compatible with Apple HomeKit
Operation by Bluetooth
IFTTT support available
We use cookies to enhance your experience.