

Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- GEWISS
Technical specifications
Rated permanent current Iu
40A
Overload release current setting
40 - 25.2A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
25kA
Rated voltage
525 - 525V
Device construction
Built-in device fixed built-in technique
Type of electrical connection of main circuit
Screw connection
DIN rail (top hat rail) mounting optional
Yes
With switched-off indicator
Yes
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as normally closed contact
0
Number of poles
3
Motor drive integrated
No
Motor drive optional
Yes
Degree of protection (IP)
IP20
Position of connection for main current circuit
Front side
Complete device with protection unit
Yes
Number of auxiliary contacts as change-over contact
0
Integrated earth fault protection
No
With integrated under voltage release
No
Type of control element
Rocker lever
Suitable for DIN rail (top hat rail) mounting
No
From same serie
GWD9042

Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- GEWISS
Technical specifications
Rated permanent current Iu
40A
Overload release current setting
40 .. 25.2A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
25kA
Rated voltage
525 .. 525V
Device construction
Built-in device fixed built-in technique
Type of electrical connection of main circuit
Screw connection
DIN rail (top hat rail) mounting optional
With switched-off indicator
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as normally closed contact
0
Number of poles
3
Motor drive integrated
Motor drive optional
Degree of protection (IP)
IP20
Position of connection for main current circuit
Front side
Complete device with protection unit
Number of auxiliary contacts as change-over contact
0
Integrated earth fault protection
With integrated under voltage release
Type of control element
Rocker lever
Suitable for DIN rail (top hat rail) mounting
From same serie
We use cookies to enhance your experience.