

Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
Technical specifications
With integrated under voltage release
No
Rated permanent current Iu
2000A
Adjustment range short-term delayed short-circuit release
1200.0 - 20000A
Adjustment range undelayed short-circuit release
3000.0 - 30000A
Integrated earth fault protection
Yes
Device construction
Built-in device fixed built-in technique
DIN rail (top hat rail) mounting optional
No
Type of electrical connection of main circuit
Bolt connection
Number of auxiliary contacts as normally open contact
0
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
150kA
Number of auxiliary contacts as normally closed contact
0
Suitable for DIN rail (top hat rail) mounting
No
Overload release current setting
800.0 - 2000A
Rated voltage
690 - 690V
Number of auxiliary contacts as change-over contact
4
Type of control element
Push button
With switched-off indicator
Yes
Degree of protection (IP)
IP30
Motor drive integrated
No
Position of connection for main current circuit
Back side
Complete device with protection unit
Yes
Motor drive optional
Yes
Number of poles
3
Warehouse states
Zagreb:
0 pcs
Zadar:
0 pcs
From same serie
1SDA071109R1 | E4.2V 2000 EKIP HI-TOUCH LSIG 3P

Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
Technical specifications
With integrated under voltage release
Rated permanent current Iu
2000A
Adjustment range short-term delayed short-circuit release
1200.0 .. 20000A
Adjustment range undelayed short-circuit release
3000.0 .. 30000A
Integrated earth fault protection
Device construction
Built-in device fixed built-in technique
DIN rail (top hat rail) mounting optional
Type of electrical connection of main circuit
Bolt connection
Number of auxiliary contacts as normally open contact
0
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
150kA
Number of auxiliary contacts as normally closed contact
0
Suitable for DIN rail (top hat rail) mounting
Overload release current setting
800.0 .. 2000A
Rated voltage
690 .. 690V
Number of auxiliary contacts as change-over contact
4
Type of control element
Push button
With switched-off indicator
Degree of protection (IP)
IP30
Motor drive integrated
Position of connection for main current circuit
Back side
Complete device with protection unit
Motor drive optional
Number of poles
3
From same serie
We use cookies to enhance your experience.